- DESCRIPTION
- SPECIFICATIONS
- INSTRUCTION
PRODUCT DESCRIPTION
In this design concept, the emphasis is on the highest functionality and practicality in everyday driving. Because the front end of the G8X platform is naturally low (Especially with aftermarket suspension configurations) The design of our M-Performance splitter is optimized for functionality, we tried to optimize the ground clearance to ensure the best driving characteristics on the street and track.
| TECHNICAL SPECIFICATION PRODUCT | . |
|---|---|
| Weave | 2X2 Twill |
| Finish | High Gloss UV Protected Clear Coat Novol Spectral |
| Construction | Pre-Preq |
| Manufacturing Process | Pre-Preq Composite |
- Remove the original screws from under the front bumper and wheel arches to gain access to the screw securing the front corners.
- Remove the OEM front corners.
- Peel off the red layer of 3M tape from the side splitters.
- Press down on the side splitters once installed, paying particular attention to the corners. It is then recommended to screw the side elements together with the internal OEM splitter screw.
- Peel off the red layer of the 3M middle splitter tape.
- Press the middle element of the splitter after installation, paying special attention to the corners. Then, it is recommended to fasten the elements with the lower OEM screws
